RST DLS-35 - 10 Series, Instruction Manual

Page: 24 / 28

DLS–35 © Dinel, s.r.o. 24
t
emperatUre and preSSUre dUrability
-
design n
,
nt
Design variant Temperature tp Temperature tm Temperature ta
Maximum overpressure for temperature tp
Up to
30°C
Up to
85°C
Up to
120°C
Up to
150°C
Up to
200°C
DLS-35N–10, 11, 20, 21,
22, 30, 31, 40, 41, 50 -40°C ... +85°C
-40°C ... +200°C -40°C ... +85°C 5 Mpa 2.5 Mpa – – –
DLS-35N–114, 23,
24, 25, 43, 44 -25°C ... +85°C
-40°C ... +200°C -25°C ... +85°C 7.5 Mpa 5 Mpa – – –
DLS-35NT–10, 11, 20,
21, 22, 30, 31, 40, 41, 50 -40°C ... +200°C -40°C ... +200°C -40°C ... +85°C
5 Mpa 2.5 Mpa 1.5 Mpa 1 Mpa 0.5 Mpa
DLS-35N–14, 23,
24, 25, 43, 44 -25°C ... +200°C -40°C ... +200°C -25°C ... +85°C
7.5 Mpa 5 Mpa 4.5 Mpa 4 Mpa 3.5 Mpa
t
m
–
medium
temperature
(at electrode)
t
p
–
temperature in process
connection place
t
a
–
ambient temperature
(housing with electronic module)
17 . p
ackaging
,
Shipping and Storage
The device DLS–35 is packaged in a polyethylene bag, and the entire consignment is placed into
a cardboard box. A suitable filler material is used in the cardboard box to prevent mechanical dam -
age during transport.
Remove the device from the packaging only just before using, thereby protecting it from potential damage.
A forwarding company will be used to ship goods to the customer. Upon prior agreement, ordered
goods can be picked up in person at company headquarters. When receiving, please check to see
that the consignment is complete and matches the order, or to see if any damage has occurred to
the packaging and device during transport. Do not use a device clearly damaged during transport,
but rather contact the manufacturer in order to resolve the situation.
If the device is to be further shipped, it must be wrapped in its original packaging and protected
against impact and weather conditions.
Store the device in its original packaging in dry areas covered from weather conditions, with humid -
ity of up to 85 % without effects of chemically active substances. The storage temperature range is
-10°C to +50°C.
All sensors except type variants CLM–36_–10, 11, 14, 50 are given protective covers at ends
of electrodes (longer than 100 mm) and of reference tubes in order to prevent damage to
electrode and tubes, tearing of the package or injury of persons handling them. Remove
the cover prior to putting into operation.