RST DLS-35 - 10 Series, Instruction Manual

Page: 20 / 28

DLS–35 © Dinel, s.r.o. 20
9 . o
rder code
10 . c
orrect Specification exampleS
process connection:
DLS –35
10 – short bar, uncoated, lengths 50 or 100mm
11 – short bar, fully coated, fixed length 30 mm
14 – like 10 , but higher pressure resistance
20 – rod, partially coated, length 0.1 ... 1 m
21 – rod, fully coated (FEP), length 0.1 ... 1 m
22 – rod, fully coated (PFA), length 0.1 ... 1 m
23 – like 20 , but higher pressure resistance
24 – like 21 , but higher pressure resistance
25 – like 22 , but higher pressure resistance
30 – rod, uncoated (dismountable), length 0.1 ... 3 m
31 – rod, fully coated, length 0.1 ... 3 m
40 – rod, uncoated with ref. tube, length 0.1 ... 1 m
41 – rod, fully coated (FEP) with ref. tube, length 0.1 ... 1 m
43 – like 40 , but higher pressure resistance
44 – like 41 , but higher pressure resistance
50 – rope with weight, uncoated, length 1 ... 6 m
electrode length in mm
– – – –
E
type of output:
N – NPN (open collector)
P – PNP (open collector)
connection method: A – stainless steel compression
gland (+ cable length)
B – plastic threaded cable gland
(+ cable length)
C – connector (socket not included
with sensor, recommended
type - see accessories.
V – plastic cable gland with spiral
(+ cable length)
H – plastic cable gland for protec-
tive hose (+ cable length)
type and design of electrode:
mech. design:
G – pipe thread G 3/4"
M27 – metric thread M 27x2
M30 – metric thread M 30x1.5
NPT – pressure thread NPT 3/4
cable – cable length in m
N – non-explosive areas
NT - high-pressure design
DLS–35N–10– M27–N– B E100 cable 5 m
(N) designed for use in normal areas; (10) uncoated short bar electrode, (M27) process connection by thread M27;
(N) output type NPN; (B) plastic cable gland; (E100) electrode length 100 mm
DLS–35N–21–G–P–C E580
(N) designed for use in normal areas; (21) rod fully coated electrode; (G) process connection by thread G3/4"; (P) output type PNP;
(C) connector; (E580) electrode length 580 mm.
DLS–35N–30–M30–P–C E1420
(N) designed for use in normal areas; (40) rod uncoated electrode with reference tube; (M30) process connection by thread M30,
(P) output type PNP; (C) connector; (E1420) electrode length 1420 mm.