RSS M-300 Owner'S Manual Download Page 187 | Manualshive

Page: 187 / 224

background image

187

Management of the M-48 live personal mixer

Management of the M-48 live personal mixer

Saving/loading USB memory

This loads or stores all data saved in M-48 units as M-48 project
files on USB memory.

1.

Access the M-48 MANAGER popup.

fig.ScrM48Manager.eps

2.

Press [F5 (LOAD/SAVE)].

ffig.ScrM48LoaSave_Guide.eps

The M-48 LOAD/SAVE popup will appear.

Target unit list

This list shows the M-48 units to which the load or save
operation will apply.

The list shows the following items:

Project file list

This lists the M-48 project files that have been saved to USB
memory. You can specify the save-destination folder for the
project file, or specify the project file that you want to load.

The function buttons have the following operations:

1.

Access the M-48 LOAD/SAVE popup.

fig.ScrM48LoadSave.eps

2.

In the target unit list, select the M-48 unit whose project
you want to save.

If you want to save the projects for multiple M-48 units, press
[ENTER] to add or clear the check marks in the appropriate
MARK fields.

By pressing [F1 (MARK ALL)] or [F2 (CLEAR MARKS)] you can add
or clear the check marks in all MARK fields of the target unit list.

3.

In the project file list, move to the location in the folder
hierarchy in which you want to save the data.

By selecting a folder and pressing [ENTER], you can move
downward into that folder. By selecting “..” and pressing
[ENTER] you can move back to the folder above the current
one.

Pressing [F3 (MAKE FOLDER)] will create a new folder.

Accessing the M-48 LOAD/SAVE popup

Item

Explanation

MARK

Add check marks to this column if you want
to load or save data for multiple M-48 units.
Pressing [ENTER] will add or remove the
check mark.

NO.

Indicates the number in the list.

UNIT NAME

Indicates the unit name.

2

1

1

2

[F1 (MARK ALL)]

Adds a check mark to all MARK fields of the
target unit list.

[F2 (CLEAR MARKS)]

Clears the check marks from all MARK fields of
the target unit list. This will be on if any MARK
fields are checked.

[F3 (MAKE FOLDER)]

Creates a folder in the project file list.

[F4 (NAME EDIT)]

Accesses the NAME EDIT popup where you can
edit the name of the file or folder.

[F5 (LOAD)]

Loads the project file selected in the project file
list (p. 188).

[F6 (SAVE)]

Saves the data of the target unit (p. 187).

[F7 (DELETE)]

Deletes the selected file or folder from the
project file list (p. 189).

[F8 (CLOSE)]

Closes the popup.

Saving an M-48 project to USB memory

M-300_e.book 187 ページ２０１０年４月２２日　木曜日　午前８時１７分

«
...
185
186
187
188
189
...
»

Summary of Contents for M-300

































































































































































































































Reviews:

No comments

Related manuals for M-300

Brand: Maestro Pages: 52

Brand: Faggiolati Pumps Pages: 38

Brand: MA lighting Pages: 6

Brand: MA Pages: 3

Brand: Mad Professor Pages: 2

Brand: Scarlett Pages: 13

Brand: Harman Pages: 56

Brand: Phonic Pages: 19

Brand: aion Pages: 28

Brand: Bamix Pages: 104

Brand: AKG Pages: 70

EUROPOWER PMP560M

Brand: Behringer Pages: 17

Brand: cecotec Pages: 52

EFECTOR SILENCER

Brand: Kuassa Pages: 12

Brand: Pro Audio Pages: 29

Brand: Living & Co Pages: 12

Brand: Peavey Pages: 16

M63 AUDIO MASTER

Brand: Shure Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands