RSS M-300 Owner'S Manual Download Page 118

Page: 118 / 224

118

Scene memory

The SCENE screen is used to edit the scene list and make various
scene settings.

In the SCENE MEMORY section, press [DISP].

fig.ScrScene_Guide.eps

The SCENE screen will appear.

Scene list

This lists the scenes. The current scene is shown in green.
The list shows the following items:

The RECALL PARAMETERS items are as follows:

The function buttons have the following operations:

Access the SCENE screen.

Select the desired scene from the scene list.

Press [F7 (LOCK)] to lock or unlock the scene.

Access the SCENE screen.

In the scene list, select the desired scene and press
[F4 (PARAM EDIT)].

fig.ScrRecallParam.eps

The RECALL PARAMETER EDIT popup will appear.

Scene indication

This indicates the scene that will be the object of the RECALL
PARAMETER EDIT popup.

M-48 MEMORY

fig.ScrM48MemRecall_Guide.eps

RECALL button

Add a check mark here if you also want M-48 memory recall
to occur when you recall the scene.

Operations in the SCENE screen

Accessing the SCENE screen

Item

Explanation

NO.

Scene number.

NAME

Scene name.

TIME

Date and time at which the scene was
stored.

STATUS

If the scene is locked or if the Recall Filter is
turned on, this area will indicate LOCK or
FILT, respectively.

RECALL PARAMETERS

A check mark is shown for parameters that
will be recalled as specified by the Recall
Filter settings.

M-48

Indicates the memory number that the M-
48 recalls.

Item

Explanation

Input patchbay settings

OUT

Output patchbay settings

PRE

Preamp settings
(gain, +48V phantom power, pad)

Input channel settings

BUS

AUX, MTX, and MAIN L/R settings

Effect and external effects device insertion
settings

GRP

DCA group and MUTE group settings

REC

USB memory recorder settings

Talkback and oscillator settings

[F1 (RECALL)]

This recalls the mixer parameters from the
currently selected scene number.

[F2 (STORE)]

This stores the current mixer parameters into
the currently selected scene number.

[F3 (LIST EDIT)]

Accesses the SCENE LIST EDIT popup where
you can edit the scene list (p. 119).

[F4 (PARAM EDIT)]

Accesses the RECALL PARAMETER EDIT popup
where you can edit the Recall Filter for the
scene selected in the scene list (p. 118).

[F5 (CLEAR)]

Clears the contents of the scene selected in the
scene list, making it a blank scene (p. 121).

[F6 (GLOBAL SCOPE)]

Accesses the GLOBAL SCOPE popup (p. 121).

[F7 (LOCK)]

Locks or unlocks the scene selected in the
scene list.

[F8 (UNDO RECALL)]

Undoes (cancels) the last-performed recall.

Locking/Unlocking a scene

Using the Recall Filter function

M-300_e.book 118 ページ２０１０年４月２２日　木曜日　午前８時１７分

Summary of Contents for M-300

































































































































































































































Search results

Summary of Contents for M-300

Reviews:

Related manuals for M-300

Brands by name

Popular brands

RSS M-300, Owner'S Manual

Search results

Summary of Contents for M-300

Reviews:

Related manuals for M-300

Brands by name

Popular brands