119
Scene memory
Scene memory
Memory number
This specifies the M-48 memory number that will be recalled
for all connected M-48 units.
RECALL PARAMETERS select buttons
These buttons specify the parameters that will be recalled if
the recall filter is turned on.
The RECALL PARAMETERS select buttons consist of the
following items:
The function buttons have the following operations:
3.
Press [F1 (RECALL FILTER)] to turn it on.
4.
Use the RECALL PARAMETERS select buttons to add a
check mark to the parameters that you want to recall.
5.
Press [F8 (OK)] to finalize the changes and close the
popup.
If you press [F7 (CANCEL)], your changes will be cancelled
and the popup will close.
The SCENE LIST EDIT popup is used to edit the scene list.
1.
Access the SCENE screen.
2.
Press [F3 (LIST EDIT)].
fig.ScrSceneListMoveGuide.eps
The SCENE LIST EDIT popup will appear.
In the SCENE LIST EDIT popup you can edit the scene names,
and copy, cut, paste, insert, or clear scenes in the list.
Scene list
This is a list of the scenes.
The function buttons have the following operations:
Item
Explanation
INPUT PATCH
Input patchbay setting
OUTPUT PATCH
Output patchbay settings
PREAMP
Preamp settings
(gain +48V phantom power, pad)
CH1-
32
Input channel settings
BUS
AUX, MTX, and MAIN
settings
EFFECTS
Effect and external effect insertion settings
DCA/MUTE GROUP
DCA group and MUTE group settings
Recorder
USB memory recorder settings
Talkback/OSC
Talkback and oscillator settings
[F1 (RECALL FILTER)]
Turns the recall filter on/off.
[F7 (CANCEL)]
Cancels the changes and closes the popup.
[F8 (OK)]
Finalizes the changes and closes the popup.
2
3
Editing the scene list
Accessing the SCENE LIST EDIT popup
[F1 (NAME EDIT)]
Accesses the NAME EDIT popup, where you can
edit the scene name (p. 120).
[F2 (COPY)]
Copies the scene selected in the scene list (p.
120).
[F3 (CUT)]
Cuts (removes) the scene selected in the scene
list (p. 120).
[F4 (PASTE)]
Pastes the copied or cut scene to the selected
number (p. 120).
[F5 (INSERT)]
Inserts the copied or cut scene to the selected
number (p. 120).
[F6 (CLEAR)]
Erases the content of the scene selected in the
scene list, returning it to a blank scene (p. 121).
[F7 (LOCK)]
Locks or unlocks the scene that’s selected in the
scene list.
[F8 (CLOSE)]
Closes the popup.
1
1
When you use [F2 (COPY)] or [F3 (CUT)], the contents of the
selected scene will be temporarily saved in the clipboard. [F4
(PASTE)] or [F5 (INSERT)] paste or insert the contents that
were saved in the clipboard. The contents of the clipboard
will disappear when you close the SCENE LIST EDIT popup.
M-300_e.book 119 ページ ２０１０年４月２２日 木曜日 午前８時１７分
