5
FITMENT OF THE RSI SMARTCANOPY TO VEHICLE
STEP
FIVE
1. PLACE THE RSI SMARTCANOPY ONTO THE LOAD BIN.
2. MAKE SURE THE RSI SMARTCANOPY IS IN ITS CORRECT POSITION BY LINING UP THE SLOTS
ON THE RSI SMARTCANOPY WITH THE SLOTS ON THE MOUNTING BRACKET.
3. PLEASE LIFT WITH CAUTION TO PREVENT POSSIBLE INJURY. IT IS RECOMMENDED A
MINIMUM OF FOUR PEOPLE ARE USED TO LIFT THE RSI SMARTCANOPY
M8 X 30 Set Screw
M8 X 25 Flat Washer
M8 X 25 Flat Washer
M8 X 25 Flat Washer
M8 X 16 Flat Washer
M8 Nyloc Nut
TIP:
DO NOT TIGHTEN TO ALLOW FOR MOVEMENT
UNTIL ALL COMPONENTS, INCLUDING THE
CANOPY ARE INSTALLED. TIGHTEN AT THE END.
TIP:
USE THE SAME HARDWARE TO FASTEN THE REAR OF THE CANOPY.