2
FITMENT KIT CONTENTS & REQUIRED TOOLS
Loadspreaders
2
PLEASE ADHERE TO BELOW TO PREVENT DAMAGE TO VEHICLE AND RSI SMARTCANOPY DURING FITMENT
WARNING
!
1. ONLY USE THE RECOMMENDED TOOLS AS INDICATED IN THE FITMENT INSTRUCTION ABOVE.
2. ONLY USE THE HARDW ARE PROVIDED IN THE FITMENT KIT OUTLINED ON THE PAGE BEFORE.
3. HANDLE ALL RSI SMARTCANOPY FITMENT COMPONENTS WITH CARE UPON UNPACKING.
4. IT IS RECOMMENDED THAT THE MINIMUM OF FOUR PEOPLE ARE USED TO LIFT THE RSI SMARTCANOPY.
5. NEVER USE ACETONE ON PAINTWORK.
STEP
ONE
STEP
TWO
1. UNPACK ALL COMPONENTS & THE HARDWARE KIT FROM PACKAGING; ENSURE THAT EVERYTHING IS
ACCOUNTED FOR AS INDICATED ON PAGE BEFORE.
2. WHEN UNPACKING COMPONENTS, PLEASE PLACE THEM ON A PROTECTED SURFACE (E.G. FOAM) TO
ENSURE THAT THE PAINT IS NOT DAMAGED OR SCRATCHED.
1. REMOVE ANY CAB GUARD, ROLL BAR, TONNEAU COVER ETC FROM THE VEHICLE.
STEP
THREE
1. USING THE HARDWARE BELOW, POSITION THE LEFT HAND SIDE REAR BRACKET AND HAND FASTEN ALL
HARDWARE IN PLACE.
2. PLEASE WORK WITH CAUTION TO PREVENT UNNECESSARY DAMAGE.
3. REPEAT THE PROCESS ON THE OPPOSITE SIDE.
“
“
M8 Spring Washer
M8 x 20 Flat Washer
M8 x 30 Set Screw
Rear Mount Bracket
TIP:
DO NOT TIGHTEN TO ALLOW FOR MOVEMENT
UNTIL ALL COMPONENTS, INCLUDING THE
CANOPY ARE INSTALLED. TIGHTEN AT THE END.
1 / 1
1
Wire Harness Connectors / Plug
Plug