13
Output Checking
To ensure the instrument is operating correctly,
please check the output voltage and current before load is connected.
1. Output voltage checking
(1) With the instrument no load, turn on the power, and make
sure the current value displaying is not zero
(2) Check the output voltage of CH1/CH2
Turn on CH1/CH2 channel and the instrument will work
in CV mode. Check whether the voltage value is
adjustable from 0V to 32V.
2. Current output check
(1) Turn on the power.
(2) Check the output current of CH1/CH2.
Use an insulated wire to connect the positive and negative
terminal of CH1/CH2
(3) Turn on CH1/CH2
Select voltage and revolve the knob to set the value to 32V
Select current and revolve the knob to set the value to 0A
C
heck whether the current value is adjustable from 0A to
3.2A.
