RS PRO RSDPB4000 Series Quick Start Manual Download Page 4

 

 

 

 

RSDPB5000 Series High Voltage Differential Probe 

RSDPB5000 Series Summary 

 

Model 

Maximum Input Voltage 

Bandwidth 

Attenuation Rate 

RSDPB5150 

1500V 

70MHz 

50X/500X 

 

Overview 

RSDPB5000 series high voltage differential probes are designed for the 

measurement of high voltage differential signal, to meet the demand for floating 
measurement. The bandwidth can be as high as 100MHz, meeting the demand for 
majority of measurement systems. 

There are a variety of ranges to choose from, and their differential voltage 

measurement range can meet with the demand for majority of tested circuits. Users may 
go into test mode to adjust the offset voltage, and also to adjust automatically to 
prevent probes being disordered after years’ of use. The electronic touch buttons give 
them a longer working life. 

The  function of 5MHz bandwidth limit selection, whose frequency bandwidth fits 

the FETs switching frequency measurement in most switching power supplies, and they 
can filter out higher frequency noise and interference. With the sound & light alarming 
function, this can also be closed manually, with a USB power supply connector to make 
it easier and more flexible for use.

 

The probes are equipped with standard BNC input 

connectors, they can be used with any manufacturer oscilloscope ( oscilloscope input 
impedance should set to 1MΩ. when 50Ω is selected, the attenuation multiply 
attenuates double.) to test waveform of the tested circuits, there is an automatic save 
function, to prevent users re-operating in case of power supply drops. The probes have 
good capability of common mode noise suppression and can be widely used in the 
research and development, debugging or overhauling work for switching power supply, 
frequency converter, electronic ballast, frequency conversion electronic appliances and 
other electric power equipments. 
 

Application 

 

Floating voltage measurement 

 

Frequency converter 

 

Switching power supplies designs 

 

Welding, plating power supplies 

 

Induction heating, electromagnetic oven 

 

Motor driven design 

 

Electronic ballast design 

 

CRT displayer design 

 

Inverter, UPS power supplies 

 

Frequency conversion electrical appliances 

 

Power conversion and related design 

 

Electrical engineering experiment 

 

Low voltage appliances experiment 

 

Power electronics and electric drive experiment 

 

Summary of Contents for RSDPB4000 Series

















Reviews: