
13
3.2.2 General Specifications
Item
RS510
Control Mode
V/F C SLV control
Frequency
Range
0.01~599.00Hz
Speed accuracy
(100% torque)
V/F: 3%
SLV: 1%
Starting Torque
V/F: 3Hz / 100%
SLV: 3Hz / 150%
Setting resolution
Digital input : 0.01Hz
Analog input : 0.015Hz/60Hz
Setting
Keypad : S
et directly with▲▼ keys or the VR
(Potentiometer) on the keypad
External Input Terminals:
AVI(0/2~10V), ACI(0/4~20mA)input
Multifunction input up/down function(Group3)
Setting frequency by Communication method.
Frequency limit
Lower and upper frequency limits
3 -skip frequency settings.
Run
Operation set
Keypad run, stop button
External terminals:
Multi- operation-mode 2 / 3 wire selection
Jog operation
Run signal by communication method.
Main Controls
V / F curve setting
6 fixed curve and one customized curve
Carrier frequency
1~16kHz(default 5kHz)
Acceleration and
deceleration control
2 off Acc / dec time parameters.
4 off S curve parameters.
Multifunction input
19 functions (refer to description on group3)
5 points, Frame1/2 : NPN&PNP by separate models
Frame 3/4 : NPN&PNP switchable
Multifunction output
16 functions (refer to description on group3)
Multifunction analog
output
5 functions (refer to description on group4)
1 point (0~10V)
Main features
Overload Detection, 8 preset speeds, Auto-run, Acc/Dec
Switch (2 Stages), Main/Alt run Command select, Main/Alt
Frequency Command select, PID control, torque boost, V/F
start Frequency ,Fault reset.
Display
LED
Display: parameter/parameter value/frequency/line speed/DC
voltage/output voltage/output current/PID feedback/input and
output terminal status/Heat sink temperature/Program
Version/Fault Log.
LED Status Indicator
For run/stop/forward and reverse.
Protective
Functions
Overload Protection
Integrated motor and Inverter overload protection.
(150% rated current for 60sec)
Over voltage
Over 410V
Under voltage
Under 190V
Momentary Power Loss
Restart
Inverter auto-restart after a momentary power loss.
Stall Prevention
Stall prevention for Acceleration/ Deceleration/ and continuous
Run.
Short-circuit output
terminal
Electronic Circuit Protection
Grounding Fault
Electronic Circuit Protection
Summary of Contents for RS510 Series
Page 3: ...3 ...