OPERATION
13/10/2016 Version No. 001
47
2. Connect the load to the front panel terminals, CH1+ & CH
2−.
Use the CH
1 (−) terminal as the common line connection.
G N
D
Common
3. Use the CH1 voltage knob to set the master
& slave output voltage (the same level for
both channels).
4. Use the CH1 current knob to set the master
output current.
5. Use the CH2 current knob to set the slave
output current.
6. Press the Output key to turn on the output.
The Output key will be lit.
G P E -1 3 2 6
7. Refer to the CH1 (Master) meter and indicators for the output
level and CV/CC status.
CH1 (Master)
voltage level
CH1 meter reading shows the output voltage.