EN-1
SAFETY INFORMATION
The circuit under test must be de-energized and isolated before
connections are made except for voltage measurement.
Circuit connections must not be touched during a test.
After insulation tests, capacitive circuits must be allowed to be
discharged.
Test leads (including crocodile clips), must be in good order,
clean and have no broken or cracked insulation.
Do not push test button before all connection and preparation is
done. The instrument must only be used by suitably trained and
competent persons.
Warnings and Safety symbols:
Caution, refer to this manual before using the meter.
Dangerous voltages.
Meter is protected throughout by double insulation or
reinforced insulation.
Complies with IEC1010-1
When servicing, use only specified replacement
parts.
