EN-8
4. AC VOLTAGE MEASUREMENTS
a). Set the range switch to
～
V position
b). Connect red test lead to “ Hi ” terminal and black test lead to
“ Lo ” terminal.
c). Connect test leads IN PARALLEL to the circuit being
measured.
d). Read the voltage value on LCD.
5. LOW RESISTANCE (CONTINUITY) MEASUREMENTS
a). Set the range switch to
Ω
position.
b). Connect the red test lead to the HI terminal and black test
lead to the Lo terminal.
c). Connect the tips of the test leads to both ends of the circuit
under test and reading is displayed on the LCD.
d). When the impedance on circuit is below 40
Ω
, the internal
sounder will operate continuously.
e). Press the
button to hold data.
f). Press
again to release data hold operation.
WARNING
Max test voltage=12V, 200mA
Do not use this range to conduct a diode test.
Do not proceed with this test unless the circuit to be tested
has an ACV reading of zero.
