4.4
Next attach the base of the trolley to the legs. Do this by following
the diagram below (Fig. 3) using the screws (H) and small nuts (J).
4.7 To attach the two sid bins hold them up against the trolley just
below the handles as shown in Fig. 6 and screw into place,
then take two screws (H) and small nuts (J) and secure the
bottom of the bins to the legs of the trolley.
4.5
After completing 4.4, turn the trolley onto its wheels, from its upside
down position.
Note! this is a heavy product and you will require assistance.
AP920M - 1 - 250407
Fig.3
Fig.4
Fig.5
Fig.6
