Crimp connectors
Crimp connectors included:
Use a pair of crimping pliers designed to crimp insulated connectors. Place the crimp connector
into the compression slot. Be sure the crimping jaws are positioned over the stripped portion of
the wire. Squeeze the handles together with enough force to crush the end of the butt splice.
Install Crimp Connectors
Keypads Installation
192-4543
Installation
Open
192-4543
Keypad by loosening and removing the back case three-point
security screw at the bottom with the special tool.
Use the provided drilling template to accurately locate and drill the required holes.
Use the screws provided to mount the back case on the wall. Be sure to draw the
wiring through the large centre hole in back case, and keep level.
Connect accurately the system wiring following the label enclosed on the rear.
Put the unit back and screw it on by using the special tool.
Template
3-point security screw
System wiring
Flat head phillips screws
Flat head phillips screws
Anchor bolts
Anchor bolts
2” (50.00mm)
33/10” (83.50mm)
18/5” (90.00mm)
2” (50.00mm)
2/3” (16MM)
1” (25MM)
CABLEHOLE DIA.
Product Center Line
SCREW SIZE
ANSI Standard #6
Body dia 5/32” (3.5mm)
Min.Lenth 1” (25mm)
PAN HEAD
3
1
2
3
4
5
E3AK8 Installation
Open E3AK8 Keypad by loosening and removing the back case three-point security
screw at the bottom with the special tool.
Use the provided drilling template to accurately locate and drill the required holes.
Use the screws provided to mount the back case on the wall. Be sure to draw the
wiring through the large centre hole in backcase, and keep level.
Connect accurately the system wiring following the label enclosed on the rear.
Put the unit back and screw it on by using the special tool.
Template
Flat head phillips screws
Flat head phillips screws
Anchor bolts
Anchor bolts
3-point security screw
System wiring
Ø=(0.3”)8mm
Ø=(0.3”)8mm
Ø=(0.3”)8mm
Ø=(0.3”)8mm
Ø=(0.3”)8mm
Ø=(0.3”)8mm
83.50 mm
3.3”
90.00 mm
3.5”
1
2
3
4
5