RS PRO 1410-1002, Operating Manual, Page: 16 / 40

page 16 of 20 Operating Manual RS 1410
rspro.com
7 Error and system messages
Display Meaning Possible causes Remedy
----
Range switching or
measured value
unstable
Measurement far
outside of the
measuring range
Measuring cell
defect
Contamination or air
bubbles
Wait for the transient effect
of the controller
Measurement leaves the
permissible range
Send in for repair
(, , )
SENS ERRO
Sensor cable defect
Sensor or probe
defect
Measuring range
exceeded or under-
cut
Cable breakage
Defective sensor or
probe
Measurement
outside of the
measuring range
Send in for repair
Send in for repair
No display,
unclear
characters
or no re-
sponse
when but-
tons are
pressed Battery depleted
System error
Product is defective
Battery depleted
Error in the product
Product is defective
Replace battery
Send in for repair
BAT
Battery depleted Battery depleted Replace battery
ERR.1
Measuring range
exceeded Measurement too
high
Measuring cell
defect
Stay within allowable meas-
urement range
Check the measuring cell
Send in for repair