RS PRO 1410-1002, Operating Manual, Page: 10 / 40

page 10 of 20 Operating Manual RS 1410
rspro.com
5 Operation and maintenance
5.1 Operating and maintenance notices
_
NOTE
The product and conductivity measuring cell must be handled with care and used in
accordance with the technical data. Do not throw or strike.
_
NOTE
If the product is stored at a temperature above 50 °C, or is not used for an extended
period of time, the batteries must be removed. Leaks from the batteries are avoided as
a result.
_
The device is calibrated at the factory with the permanently connected conductivity
measuring cell. The highest system precision can be achieved in this manner. If
desired, a gradient correction can be carried out for the product in order to further
optimise the accuracy in a narrow range. This is only necessary for normal use. See
Adjustment of the measuring input.
5.2 Battery
5.2.1 Battery indicator
_
If the empty frame in the battery display blinks, the batteries are depleted and must be
replaced. However, the device will still operate for a certain length of time.
If the BAT display text appears in the main display, the battery voltage is no longer
adequate for operation of the product. The battery is fully depleted.
5.2.2 Changing battery
DANGER
Danger of explosion!
Using damaged or unsuitable batteries can generate heat, which can cause the batter-
ies to crack and possibly explode!
– Only use high-quality and suitable alkaline batteries!
_