9
Waveforms
Waveforms
----Utility Functions and System Settings
This key is used to set system parameters and check version information.
•
Press this key and then press the help soft key to obtain built-in help information about the product.
•
The corresponding key backlight will turn on when this function is selected.
----Store and Recall
Through this key, users can store/recall the instrument’s state or arbitrary waveform data edited by users.
•
As it supports file management system, users can do general file operations.
•
In addition to the built-in nonvolatile memory (C disk), an external U-Disk (D disk) can also be used.
•
The corresponding key backlight will turn on when this function is selected.
10.Waveform Option
---- Sine
Provide sine waveform output which ranges from 1μHz to 100MHz.
•
The backlight
of
will turn on when this function is
selected.
•
“Frequency/Period”, “Amplitude/High level”, “Offset/Low level” and “Phase” of the sine waveform can be adjusted.
---- Square
Provide square waveform output which ranges from 1μHz to 25MHz.
The backlight
of
will turn on when this function is
selected.
•
“Frequency/Period”, “Amplitude/High level”, “Offset/Low level”, “Phase” and “Duty” of the square waveform can be adjusted.
Utility
Store/Recall
Waveforms
Waveforms
Summary of Contents for 123-6460
