3
CARE / MAINTENANCE
RRS clamps are finished with an anodized plating
that protects the aluminum from corrosion and mild
abrasion. It will not protect it from scraping against
or drops on rocks/concrete/etc.
|
GENERAL CARE
|
CLEANING
|
LUBRICATION
Take precautions to prevent your clamp from
getting fouled in mud, dirt, or sand. If your clamp
is fouled, dry dust and dirt can be blown off and/or
wiped off with a soft cloth. Mud or salt water should
be lightly rinsed off with fresh water and then
thoroughly dried. DO NOT submerge your ball head
when washing and do not direct a high-pressure
stream of water at the ball head.
DO NOT attempt to remove the knobs. If fine sand/
grit fouls the knob, simply run a gentle stream of
water around the knob while rotating it one-half
turn back and forth.
RRS clamps are lubricated at the factory and parts
that require lubrication are sealed.
NO LUBRICATION IS REQUIRED BY THE USER.