9
|
Tension Adjustment
1
Position Ball Lock Lever halfway closed and
insert T8 Torx Key into Tension Adjustment
screw.
2
While holding Ball Lock Lever in place, remove
Tension Adjustment screw. Lift both straight up.
3
Reposition and reinstall Ball Lock Lever
counter-clockwise for increased max lockup, and
vice-versa.
4
Secure with Tension Adjustment screw.
DO NOT OVER-TIGHTEN.
The BPC-16 comes with a tension setting that is
suitable for most support setups. If needed, the
ball lock lever can be adjusted to apply more or less
press tension to the ball.
less tension
more tension