RRD 26DPASWKF1200S, User Manual

Page: 5 / 17

USING A SUP / SURF / HYDROFOIL
On shore Handling :
The RRD foilboard should always be laid on its side when left on the ground. Never
leave the hydrofoil (assembled with the board) standing up or upside down. It can
easily fall on its side and get damaged.
USING A KITE HYDROFOIL
On shore Handling :
The RRD kitefoil should always be laid on its side when left on the ground. Never leave the
kitefoil (assembled with the board) standing up or upside down. It can easily fall on its side and
get damaged. When heading for the water, the kitefoil should always be carried on its side with
the board under your arm. Hold the board just forward of where the foil mast is attached to the
board, like this:
Water handling:
Walk into the water while keeping your board and foil under your arm (board on its side). Go
deeper into the water until reaching a water patch deep enough for the length of the foil.
When heading for the water, the foilboard should always be carried very carefully.
Hold the board on its side or on your head like explained in the pictures below:
USING A WIND HYDROFOIL
On shore Handling :
The RRD WS foil should always be laid on its side when left on the ground. Never leave
the WS foil mounted onto the foilboard standing up or upside down without being
connected to the rig. It can easily fall on its side and get damaged and/or damage your
rig or hurt anyone around it. In case the wind blows below 15 knots you can leave it
upside down only if attached to your rig as per photo below:
When heading back to your car or coming from your car heading to the beach you
should always carry the foil and foilboard as shown below:
When heading to the water or off the water, hold your rig with one hand and the board
handle on the bottom with the other one. In case you launch on shallow waters, you
can drag the board and rig towards deep water as shown in the photo below: