CONTROLLER MODES
MODE to select the working mode:
1. NORMAL (most common)
Increases the water pressure or draws water
up from below pump and pressurizes. This is
the normal booster pump application.
1.0 - 2.0 Low Pressure
2.0 - 3.0 Medium Pressure
3.0 - 4.0 High Pressure
Note:
Pump shutoff will become unstable if
pressure is set too high. If pump will not
shut-off, reduce pressure setting
2. BOOST
Increases poor water pressure. For example
increasing 20PSI water pressure to 45PSI on
a the second story of a house.
3. TIMER
Operates for the specified amount of time and
then stops the pump. Used for filling elevated
tanks.
LOCK / UNLOCK Hold + and -
together
SYSTEM RESET OPTIONS:
POWER RESET:
Controller Soft Reset:
Turn off controller power button (display will stay on if solar
panels are connected), wait 60 seconds and turn power button back on.
Controller Hard Reset:
Disconnect solar panels and batteries. Wait 60 seconds,
connect batteries, then solar panels.
Pump Hard Reset:
Unplug pump, wait 60 seconds, plug pump back in.
PUMP SETTINGS RESET:
Pump Factory Reset:
Press and hold MODE for 3 seconds, all factory parameters will
be restored to factory settings.