CONTROLLER DISPLAY
220V AC INPUT (Only if Required)
Your Controller is designed to take solar power and charge your 24v battery
bank. As an optional backup, it is also setup to accept 220V AC to both charge
your batteries and run your pump directly if desired. There is a 3 prong outlet
and a pigtail in your kit that allows for the wiring of 220v line power connector.
Wiring 220v is only for certified professionals or those familiar with 220v power.
Green Stripe Wire - GROUND
Blue (or Black) Wire - L1 HOT
Yellow (or Red) Wire - L2 HOT
Wire out or cap your neutral wire.
L1
L2
G