- 12 -
M
ICRO
M
AG
-OP-EN
INSTALLING DISK PAD DRIVER OR BRUSH:
1. With empty Tanks, remove Squeegee and make sure
the Tank latches
(A)
are locked on.
2. Lower the Scrubdeck by depressing the Scrubdeck
Switch
(B)
on the Handlebars and turn
OFF
the
machine
(for machines with manual foot-pedal
Scrubdeck lifting - lower manually)
. Remove Key if
Option equipped.
3. Tip machine back by pulling back on Handlebar and
allowing the machine to rest on the Triangle Squeegee
Plate
(C)
.
4. Attach brushes or pads to motor drives. Squeeze the
scissor locking device and lift brush up on to the Motor
Drive Hub. Make sure the scissors close and lock on
to the Brushes
(SEE BELOW)
.
5. With Brushes locked into place, tip machine back down
to a level surface.
INSTALLING DRIVER PADS:
1. Select the correct Pads that best meet your cleaning
application needs. Consult your local dealer for
assistance.
2. Pad Installation: Attach Pads to Pad Drivers before
connecting Drivers to Motor Hub. Screw center clip
(E)
into place
(SEE BELOW)
.
REPLACING DRIVER PADS ON MACHINE:
1. Select the correct Pads or Brushes that best meet
your cleaning application. Consult your local dealer for
assistance.
2. With empty Tanks and Squeegee removed, tip
machine back and rest on Triangle Plate.
3. Attach Pads to Pad drivers and screw center clip
(F)
into place
(SEE BELOW)
.
A
B
C
D
E
F
NOTICE
NEVER place aggressive Pads (Maroon Prep, Dominator
HD Strip, etc.) directly onto the Grip Face. Always use
Red or Blue Spacer pad to prevent Grip Face damage.
