- Page 4 -
Setting the Flash Unit’s Controls
Photo Cell
This cell senses the light of another flash unit.
Digital Display
Shows power output. Range 6.0 (Full
Power) to 1.0 in full stop (and 1/10 stop) increments
Beeper On/Off
Press to turn audible ready beeper off.
Press again to turn on. Beeper light indicates status.
Modeling Light Mode
Press this button to turn the
modeling lamp on/off. When on, the lower LED to the right of
the button lights and the modeling light will “track.” To adjust
the power ratio on the modeling light independently of the
flash, push the modeling lamp power up or down. The
display will blink indicating modeling lamp power setting.
Photocell
Digital Display
Beeper On/Off
Modeling
Light
Mode
Modeling
Lamp
Power
Sync
Cord
Power Cord
Tilt Knob
Remote
Display
Remote
Button
Ready LED
Test
Button
Flash
Power
Power On/Off
Fuse Cover
Umbrella Mount
Mount Knob