23
Remove the side pads from the covers that
are attached with hook and loop.
Wash the pads with mild detergent. Once dry,
reattach them to the side pad covers.
SIDE PADDING SYSTEM CLEANING
FIGURE 9.1
FIGURE 9.2
To install the cape or face seal, start by
inserting the front clip into the track around
the front of the jaw. Make sure the holes are
aligned and insert and tighten the screw to
secure the front of the cape. Press the rubber
seal in up both sides.
FACE SEAL/CAPE INSTALLATION/REPLACEMENT
FIGURE 10.1
FIGURE 10.2
Next attach the side cape clips into the
helmet. Make sure the clip goes over the
notch on the helmet and the clip edge goes
into the track around the edge of the helmet.
Summary of Contents for Z-LINK
Page 47: ...47 NOTES...
