16
RESPIRATOR SETUP AND CARE - STANDARD
CONFIGURATION
Insert the threaded end of the breathing tube
(04-835) into the threaded hole in the back
of the Z-LINK
®
and screw the breathing tube
in completely without over tightening.
Insert the bayonet end of the breathing tube
into the outlet of the PX4 AIR
®
PAPR and
twist it in until it is secure.
FOR USE WITH RPB
®
PX4 AIR
®
- SEE THE PAPR USER MANUAL
When the Z-LINK
®
Respirator is being used in conjunction with the RPB
®
PX4 AIR
®
PAPR, please
refer to the RPB
®
PX4 AIR
®
PAPR Instruction Manual for set up and use of the assembly.
Note: The RPB
®
PX4 AIR
®
is a Powered Air Purifying Respirator, therefore care must be taken
when selecting the correct filter for the application the respirator will be used in.
CONNECT THE AIR SUPPLY - POWERED AIR
FIGURE 2.1
FIGURE 2.2
Summary of Contents for Z-LINK
Page 47: ...47 NOTES...