19
Speed Settings: Cycle through the 3 speed
settings by pressing the Power Button. Each
button press will advance through these
speed settings.
Speed 1 - 170 slpm
Speed 2 - 210 slpm
Speed 3 - 240 slpm
FAN SPEED AND AIR BLOCKAGE INDICATION
Normal - Speed 1
Mild Blockage - Speed 1
Moderate Blockage - Speed 1
Heavy Blockage - Speed 1
Blocked - Speed 1
cannot be achieved
Normal - Speed 2
Mild Blockage - Speed 2
Moderate Blockage - Speed 2
Heavy Blockage - Speed 2
cannot be achieved
Blocked - Speed 1
cannot be achieved
Speed ~ 170 slpm
Speed ~ 210 slpm
Normal - Speed 3
Mild Blockage - Speed 3
Moderate Blockage - Speed 3
cannot be achieved
Heavy Blockage - Speed 2
cannot be achieved
Blocked - Speed 1
cannot be achieved
Speed ~ 240 slpm
The blue lights indicate the selected fan speed. The red lights indicate the level of blockage.
When the lights flash red and blue, the selected fan speed cannot be reached, but sufficient air
supply (170slpm) can still be reached. When 3 lights flash red, the alarm will sound indicating
insufficient air supply is being produced. Return to a safe environment and check the filter and/or
the airway for blockage. If the filter is contaminated, replace with a new cartridge.
When the alarm sounds it is recommended that you leave the work area immediately. Do not
remove the respirator, remove the filter, or disconnect the breathing tube while in the work
area. Once outside of the work area power the unit down and resolve the problem.
OPERATION LEGEND
FIGURE 6.5
FIGURE 6.6