88
™
Holding the L4
™
Light Band in place, push
fit the Locking Clip over to secure the band
to the helmet, making sure that the band is
sitting neatly on the center of the helmet and
that the light is held securely in place.
Tape
Remove the backing from the double sided
tape on the back of the L4
™
Light. Locate the
L4
™
on the front of the Helmet making sure
that the steel clip is securely clipped over the
front of the peak and that the L4 is centered
on the helmet. Then press firmly to make
sure the tape is adhered to the helmet .
Remove the Hand strap and ring from
the air inlet fitting at the back of the helmet.
Once removed, insert the base clip of the L4
Light.
Stretch the L4
™
Light Band over the top of
the helmet and draw it tight to connect the
second hole in the band over the clip.
INSTALLATION AND USE
FIGURE 2.1
FIGURE 2.2
FIGURE 2.4
FIGURE 2.3
