66
™
POWER
The L4
™
is powered by a proprietary rechargeable battery (09-532-2). The light is provided by
2 bright white LEDs. When starting fully charged, the battery should last around 4 hours.
POWER ON/OFF
The L4
™
Light has one power setting. To turn the unit on or off, simply press the button on the
battery pack.
ENVIRONMENTS
The L4
™
is a sealed unit and can be used in outdoor environments, but must not be submersed
in water or used in excessively wet conditions.
CLEANING
Clean the L4
™
with mild detergent and a soft cloth or a disinfectant wipe.
UNPACKING
Inspect the package contents for shipping damage and ensure all components are present.
BATTERY
To reduce the risk of battery fire or explosion or of fire or electric shock
with the charger, follow these precautions and procedures:
Before charging
Allow the battery to cool before charging if it feels hot.
Inspect the battery pack before each time it is charged. If there are any cracks or damage do
not charge the battery pack.
Inspect the charger and power cords before use. Replace if any parts are damaged. Do not
substitute, modify or add parts to the chargers. Do not attempt to service the chargers. There
are no user-serviceable parts inside.
Use only the provided charger and cord.
Where to charge
Charge only:
indoors,
in a dry area,
away from sources of heat,
away from anything that can burn if exposed to heat or flame,
in a well-ventilated place,
where the charger can be monitored and easily observed during charging.
Charging
The Power Supply is a universal 110-240 volt adaptor. The batteries are manufactured to
last 350 charge cycles for peak performance. Full charging cycles take 4 hours, it processes
through 3 steps of charging as listed below:
SPECIFICATIONS AND INSTRUCTIONS
WARNING
