6
ATTACHING THE FAN BLADES
Attach the blade to the blade bracket, align the holes in the blade and the blade bracket, secure with
screws and fiber washers as provided in screw bag.
Tighten each screw securely starting with the center screw.
Make sure the blade is straight.
Repeat steps for the remaining blades.
Fasten each blade assembly to motor by tighten two captive washer screws pre-attached on blade bracket.
Blade
Screw
Blade
bracket
Nut
Fiber washer
Fitter plate
INSTALLING THE LIGHT KIT
Step 1. Connect the male plug on switch housing
to female plug in LED light kit.
Step 2. Remove the 4 screws from fitter plate and
secure the LED light kit by using these screws.
Step 3. Secure the glass shade to the light kit by
turning it clockwise until snug.
DO NOT overtighten.
CAUTION:
Before starting installation, disconnect
the power by turning off the circuit breacker.
Turn power off using fan switch is not sufficient
to prevent electric shock.
