background image

Warranty

PLEASE  RETAIN  YOUR  ORIGINAL  BILL  OF  SALE  AS  YOU  WILL  NEED  TO  PRESENT  IT 
SHOULD YOU REQUIRE SERVICE UNDER THIS WARRANTY.

TO  VALIDATE  THIS  WARRANTY,  THE  REGISTRATION  CARD  AND  A  PHOTOCOPY  OF  THE 
SALES RECEIPT FROM AN AUTHORIZED ROYER DEALER MUST BE ON FILE WITH ROYER 
LABS. 

Royer Labs hereby warrants all Royer SF-series microphones with the following terms and conditions.

WARRANTY PERIOD             
Body fit and finish                   

Lifetime

Transducer frames/magnets    

Lifetime

Transformers                            

Lifetime

Vacuum Tube

 

10 years Parts and Labor

Cables & Cable Sets             

2 years Parts and Labor

Shock Mount Accessories        

2 years Parts and Labor 

Ribbon Element                        

1 year Parts and Labor

SCOPE OF WARRANTY:
From the date of original  purchase and for the respective  periods  specified above,  Royer Labs agrees to 
repair, at its sole expense, all Royer Labs products which are defective in material and workmanship.

EXCLUSIONS:
This warranty does not cover the following:

1.

Defects or damage caused by accident, fire, flood, lightning or other acts of nature.

2.

Defects  or  damage  caused  by  abuse,  misuse,  negligence  or  failure  to  observe  the  instructions 

contained in the owner’s manual furnished at the time of original purchase.

3.

Damage caused during shipping or handling.

4.

Products that have had their serial numbers altered or removed.

5.

Products purchased in “AS-IS” (used) condition.

6.

Products that have been altered or repaired by anyone other than a factory authorized service station.

ROYER Labs

2711 Empire Ave.

Burbank, California 91504

Telephone 818.847.0121

Fax 818.847.0122

www.royerlabs.com

23

Summary of Contents for SF-24V
























Reviews: