4.
5.
1. Fit the meat tray (9) onto the meat grinder body
(8) so that the wide part is positioned over the
motor house of the appliance.
2. Place the mixing bowl(27) or similar under the
meat grinder body opening.
3. The appliance is now ready for use.
1. Plug the power cord into main power outlet and
switches it ON.
2. Turn Speed control knob to speed1(or any speed
setting) indicator light on the control panel will
now be illuminated.
3. Cut your meat into smaller pieces, so the pieces fit
into the feeding tube. Dice or cut into strips with a
width of approx. 2.5 cm.
4. Put the pieces onto the tray(9).
5. Select the speed you want using the four speed
buttons. Recommended speeds are shown in the
table above.
6. The meat pieces travel down the feeding tube.
Push down carefully with the tamper (10). Do not
press too hard, otherwise you may damage the
appliance.
3.
It the meat grinder body(8) in the accessory socket
(12),so that the arrow is aligned with the circle.
Turn it to the vertical position, so the arrow is
aligned with the arrow.
Summary of Contents for PKM-1900.7BG
