Produced in China for A. Mir & Co., Ltd.
© A. Mir & Co., Ltd.
4 / 5
www.royalcraft.co.uk
Step by step assembly instructions
All Bolt Head Caps should not be attached before finally tightening all Bolts with Spanner.
Step One
With the help of another person,
open the packaging,
place Table Top (A) upside down on a flat,
non-abrasive surface to
avoid scratching the table surface or rim.
Step Two
Loosely attach the Table Legs (B) to
the Table Top (B) using
Bolt Head Caps (F2), Bolts (W25),
and Flat Washers (F3).
Only tighten the bolts when
all bolts and washers are in place.
Once you are satisfied with
the alignment of the components
carefully tighten all bolts using Spanner (S1).
Do not over-tighten.
Cover each bolt with Bolt Head Cap (F2).
A
B
F2
W25
F3
Milan 80 x 80cm
Aluminium Table
Assembly Instructions
Summary of Contents for Milan
Page 1: ......