Royalcraft Milan Assembly Instructions Download Page 2

Produced in China for A. Mir & Co., Ltd. 

© A. Mir & Co., Ltd.       

 

2 / 5 

www.royalcraft.co.uk

Before you start

Warnings 

IMPORTANT, RETAIN FOR FUTURE REFERENCE 
READ CAREFULLY 

See enclosed instructions for assembly, safety and care 
information. 

Failure to follow the warnings could result in serious injury. 

Handle heavy parts with care. 

Ensure that this product is fully assembled as illustrated before 
use. 

This product should only be used on firm, level ground. 

Keep small parts out of reach of children. 

Do not stand or climb onto this product. 

This product is intended for 

domestic use 

only.

Furniture can be dangerous if incorrectly used. No liability will be 
accepted for damage or injury caused by incorrect use of this 
product. 

Dos 

When you are ready to start, make sure that you have the right 
tools, plenty of space and a clean, dry area for assembly. 

Removing all packaging and banding and place the components 
carefully on suitable surfaces to prevent damaging or scratching 
them.   

Check the pack and make sure you have all of the parts listed. 

Check all screws and bolts are tightened and inspect regularly. 

This product is suitable for all year outdoor use.   

However to prolong its life we recommend that during severely 
bad weather and during the winter months, it is stored in a cool, 
dry place.   
Before storage, ensure that the product is clean and dry. 

To clean, wipe down with a sponge and warm soapy water and 
wipe with a clean, dry cloth. 
sponge and warm soapy water and wipe with a clean, dry cloth. 

Don’ts 

Do  not  use  scourers,  abrasives,  washing  powders,  chemical 
cleaners or any other substances containing abrasives since these 
substances can damage the product, including the glass panel. 

Do  not  place  very  hot  or  very  cold  items  on  the  glass  surface 
unless  adequately  thick  table-mats  are  used  to  prevent  such 
items from coming into contact with the glass. 

Do not use the glass as a chopping surface.  

Do not strike the glass with hard or pointed items. 

Do not use power tools to construct this product. 

Do not use this product if parts are missing, damaged or worn. 

Do not sit or lean on this product. 

Do not stand or climb onto the product and do not use it as a 
ladder, as this could lead to it unbalancing and overturning. 

Never drag furniture when moving it, always lift it. 

Number of people required for assembly 

Two people. 

Time to assemble 

10 Minutes

 

Tools required 

Tips:   
Do NOT fully tighten bolts before 
all components are connected. 
Only fully tighten once you are 
satisfied with the alignment of all 
components. 
Do not over-tighten the bolts.   

Milan 80 x 80cm

 

Aluminium Table

Assembly Instructions 

Reviews: