STEP#6:
“LOOSELY”
attach the 2 short
legs to Hopper end of grill
base corners using (4) 1/4-20 x
5/8 Phillips head bolts and (4)
flange nuts per leg. Repeat for
the 2 long legs to the other
end of the grill base .
NOTE:
leave legs loose until bottom
pan has been installed.
STEP#7:
Using (4) 1/4-20 x 5/8
Phillips head bolts and
(4) flange nuts, position
bottom shelf between
the legs.
Now final
tighten leg bolts to
cabnet from step above
STEP#8:
Secure a cap nut on
ONE
end of the 3/8 rod with a
hammer.
SLIDE over the rod:
(1)3/8 washer - (1) 5” wheel,
(1) 3/8 washer and slide rod
through both legs.
Slide on (1) 3/8 washer, (1) 5”
wheel, (1) 3/8 washer and(1)
cap nut.
NOTE:
Support the rod ends
and final secure the cap nut
by tapping with a hammer.