![background image](http://html1.mh-extra.com/html/royal/r-wh-1-5-30/r-wh-1-5-30_manual_1494149027.webp)
2 meter
Tank with water
Mixer
Body
«
WH
»
series
Thermometer
Power cord
Safety valve
Water inlet valve
Water inlet valve
Cold water pipe
Safety valve lever
Drainer
2
7
«
TT WH
»
series
Hot water pipe
Fig. 1 Water heater installation and connection scheme
Fig. 1 Connection scheme to open tank filled with water
6.3. Electrical connection
Attention! Electrical wiring should be done by a qualified technician, ensuring it complies
with safety rules. The manufacturer
i
s not to be held responsible for any damage caused by
the
i
ncorrect earthing of the system
or for fault defaults of the electricity supply.
6.3.1.
The w
ater heater is supplied with a power supply cable. Connect the appliance to power
source.
6.3.2. The water heater must be earthed. Grounding scheme should ensure the absence of electric
potential on the body
of the water heater. The earth cable (of yellow-green color) should be fixed to
the terminal marked by the symbol
. Fix the
power supply cable using the cable clamps.
6
.3.3. Make sure that the power supply voltage conforms to the water heater technical characteristics
indicated on the data
label.
ATTENTION!
Before connect the appliance to power source, fill the tank up with mains water
.
Shower
Storage device
(bath or sink)
Connective
tee
R10310914
UZ/RU 06.2021