1
2
ROY
AL HT700X PAPER SHREDDER
Setup:
1. Place the shredder securely on top of the wastebasket. Be sure not to
allow your fingers to get between the basket and the shredder as you
are placing the shredder in place.
2. Plug the power cord into any standard 115-volt AC outlet.
3. Place the Main Switch in the AUTO position. The green LED should
illuminate. If the LED does not light up, lift the shredder out of the
wastebasket and place it back in so that it sits flush inside of the
wastebasket.
Operating the shredder:
The Main Switch is located on the top of the shredder. The Main Switch
has three (3) settings.
1. When AUTO is selected, the shredding process is started automatically
by inserting the paper into the feed opening. The shredder will stop
automatically when the paper has completed its travel through the feed
opening.
2. REV is used to assist in the removal of a paper jam, which reverses the
shredding process prior to a completed cycle, thus clearing the cutters.
3. OFF position is recommended when emptying the wastebasket or when
the shredder is not in use for a prolonged period of time.
O position only
.
Shredder capacity:
HT700X will shred seven (7) sheets of 20-lb. bond paper and will accept paper
widths up to 8 3/4". When shredding small material like envelopes or credit
cards and receipts, insert them through the middle of the feed opening.
Cautions:
1. Keep all loose articles of clothing, ties, jewelry, hair or other small items
away from the feed opening to prevent injury.
2. Keep in the OFF position when the shredder is not in use for prolonged
periods of time.
3. Remove all paper clips from paper before shredding. Unit will cut small
paper clips however it is not recommended.
4. Do not place hands or fingers into the shredder throat as serious injury
could result.
5. Continuous shredding of computer paper should not exceed 2 minutes.
If continuous use is required, it is recommend that the shredding time
should be 2 minute on and 4 minute off to allow for proper cooling of
the motor.
6. Always turn off or unplug the shredder prior to moving, cleaning or
emptying the wastebasket.
7. Empty wastebasket frequently.
1. Operating the shredder at the maximum capacity continuously for a
prolonged period of time, eg. more than 2 minutes without stopping.
2. Exceeding the shredding capacity, eg. inserting more than seven (7) sheets
of 20-lb. paper at one pass, or if the paper is not fed squarely into the
feed opening.
Both abnormal operations may result in the activation of the automatic motor
overload protection, which terminates the power to the unit. If this occurs you
should:
1. Unplug the power cord from the AC outlet and wait at least 4 minutes
for the overload protection to reset. Tear or cut off any excess paper from
the top of the shredder.
2. Plug the power cord back into the AC outlet and place the Main Switch in
REV. Pull the remaining paper out of the cutters. Place the Main Switch
back to the Auto position and if neccessary
clear the feed opening of any remaining shredded pieces of paper. Keep
fingers away from feed opening to avoid harm.
3. With the Main Switch in the AUTO position and the feed opening clear, you
are now ready to resume normal shredding.
Specifications:
Shred Type:
Cross-Cut
Shred Width:
5/32" X 1 5/8" or 4m x 42mm
Shredding Capacity:
7 Sheets or 1 Credit Card
Feed Opening:
8 3/4" or 222mm
Input:
115 volt AC, 1.85 amp.
ROY
AL HT700X PAPER SHREDDER
Paper jams and overload protection:
HT700X is equipped with a motor overload protection device. The normal short
duty cycle for continuous shredding at maximum capacity is 2 minutes on and
4 minutes off. The power may terminate automatically in case of the following
abnormal situations:
ROYAL PAPER SHREDDER WARRANTY
PLEASE FILL OUT AND RETURN THE WARRANTY CARD INCLUDED WITH YOUR NEW ROYAL
PRODUCT OR FILL OUT THE WARRANTY REGISTRATIONFORM ON THE ROYAL WEB PAGE
AT WWW.ROYAL.COM. IT ENTITLES YOU TO PRODUCT WARRANTY AND TECHNICAL SUPPORT
UNDER THE TERMS AND CONDITIONS DESCRIBED HEREIN.
BE SURE TO KEEP A COPY OF YOUR SALES RECEIPT!
STANDARD WARRANTY:
OLIVETTI OFFICE USA, Inc. d/b/a ROYAL CONSUMER INFORMATION PRODUCTS ("Royal"),
765 US Highway 202, Bridgewater, NJ, 08807 WARRANTS that your NEW Royal product is free
of defects of workmanship and materials. If there is a defect or malfunction of this product, Royal
will repair it free of charge as follows:
PARTS: New or comparable rebuilt parts in exchange for defective parts for ONE YEAR from date
of customer purchase
Summary of Contents for HT700X
Page 3: ......
