PIN AND PEG
Pin and Ring system
Each end of the tent poles fits onto a corresponding
metal pin. The metal pin fits into the metal ferrule on the end of each pole (Fig
2). It may require a little extra force to push the pole into an arch to fit it into
the second pin. Some pins are located close to each other. Refer to the
pole points to check that you are selecting the right pin. Rings attached to pins
are to be pegged to the ground to secure the position of the poles and
maintain the shape of the tent.
Pegging your tent
Each tent comes with a bag of tent pegs. These are
required to anchor the tent to the ground. For maximum anchorage, drive the
peg into the ground at an angle of approximately 45° making sure that the
flysheet seams are in line with tent seams
GUYLINES
Locate with care
Most Royal tents have luminous guylines which make them
more visible when it starts to get dark When pegging out guylines it is
important to consider where they will be most conveniently placed to avoid
tripping while providing the best anchorage for the tent.
