![background image](http://html.mh-extra.com/html/royal/115cx/115cx_owners-manual_1493921028.webp)
22
TAX RATE
(Continued)
__________________________________________________________________
TO PROGRAM A FIXED TAX RATE:
(Recommended For Most Applications)
"PRG" + Tax 1 - 4 + [Tax Shift] + Tax Rate (4 Digit #) + (Amt/Tend/TOTAL)
Note: You can program up to 4 Tax Rates or just 1. The following steps allow you to set up 1 or up to 4. Remember, when you
determine a department's tax status, at that point, you identify the tax rate you want for that department.
If you make a mistake between steps 2 and 4, press the Clear
[C]
key and start again at step 2.
1.
If needed, enter the program mode: Move the Control Switch to the "PRG" position. If a security code has been
assigned, enter the number and press the
[CHARGE]
key now. If not, continue with Step #2.
2.
Enter
(1 - 4)
, 1 through 4 being the Tax Rate identifier.
3.
Press
[Tax shift]
key
4.
Enter the
Tax Rate
. Up to 5 digits can be used. You MUST enter three digits after the desired decimal place. For
example, to enter 5.5%, type
[5500]
; to enter 7%, type
[7000]
; to enter 10%, type
[10000]
.
Note: If you want to set up another Tax Rate, return to step 2. When you are finished setting Tax Rates, go to step 5 to
complete the procedure.
5.
Press the
[Amt Tend/TOTAL]
key.
Continue with other programming or move the Control Switch out of the Program mode.
Example: Set a tax rate of 5.5%:
1. If needed, move the Control Switch to the Program mode (PRG).
2. Enter [5500] + the [Amt Tend/TOTAL] key.