background image

4

2. SAFETY PRECAUTIONS

Failure to comply with any of the following safety procedures could result in serious injury .  Please read the instructions 
carefully and keep for future reference.  
1. Only a licensed electrician should install wiring and outlet for the laminator.

2.  Ensure the unit is plugged into a properly grounded outlet with the correct voltage.

 

3.  Keep hands and clothing (i.e. Neckties) away from rollers. The rollers have pinch points that can trap body parts or 

clothing and cause serious injury.

4. Keep flammable and wet objects away from the machine.

5. Place the laminator on a level surface, then adjust the casters to the locked position in order to keep the laminator steady.

6. Avoid excessive sunlight, humidity and extreme temperatures.

7.  Ensure the unit is turned off, cooled, and unplugged from the outlet prior to moving and/or repairing.

8. Keep out of reach of children.

9.   

Only Royal Sovereign authorized maintenance and service technicians should make repairs.

10.  Do not attempt to laminate items that exceed total recommended material thickness for the unit.

11. When cleaning the machine, don't use flammable sprays or materials.

12.  Do not touch the rollers when they are hot or place foreign objects inside the machine.

13.  Do not cover the surface of the machine until the machine has completely cooled.

14.  If emergency happen, press emergency switch immediately.

15.  Temperature of circumstance: 20°C ± 5°C; humidity of circumstance: < 95%(20°C ± 5°C).

16.

Warning - Hazardous Moving Parts – Keep Fingers And Other Body Parts Away.

Summary of Contents for Sigmont 65H













Reviews: