2.1 Rollers Not Heating
(
RSC-1650H / HR Only
)
1. Disconnected Heater Wire.
2. Defective T/Fuse.
3. Defective Bi-metal.
4. Defective Heater Assembly.
5. Defective Main PCB.
NOTE: Below steps require you to disassemble the Right, Left,
1. Disconnected Heater Wire.
a) Check to make sure that the heater wire is connect to the Main PCB. Figure 1
2. Defective T/Fuse.
a) Use the multi-tester to check the continuity on the "Wire-T/Fuse".
If it fails replace the Wire-T/Fuse. Figure 2
23 ~ 29
30 ~ 36
37 ~ 42
2. Troubleshooting
CAUSES
MEASURES
Follow the below steps in order.
and/or Rear Covers. (Refer to the "Replacing Parts" section)
WIRE-T/FUSE
Figure 2
Heater Wires
Figure 1
4
