4
MODEL RSC-1401CLTW RSC-1651CLTW RSC-1653P
Power Supply
AC 100-120V or 220-240V AC 100-120V or 220-240V AC 100-120V or 220-240V
50/60HZ 50/60HZ
50/60HZ
Single Phase
4
3. INSTALLATION
Note: The laminator should be installed by a trained service technician.
Note: For proper input voltage requirements see the marking lable on the
equipment.
ELECTRICAL REQUIREMENTS
The laminator comes fully assembled, except for the stand to avoid shipping damage.
Upon arrival, thoroughly inspect the unit. It is imperative that any shipping damage is
reported and a claim is filed with the delivering carrier immediately upon receipt.
The laminator should be located in an area with adequate work space for feeding
graphics and lamination materials.
Avoid placing the laminator in a dusty area or near sources of extreme heat or cold.
Once the laminator is in place, lock the casters into position(“ON” position). Always
unlock the casters (“OFF” position) when moving to a different location.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Royal Sovereign recommends that a licensed electrician ensures proper power
installation to your laminator in accordance with electrical codes in your area.
The laminator should have a dedicated power line.
230V UL
120V UL
220V EU
240V UK
220V AU
