10
Product Operation
Press this button while the screen light is ON. The unit will automatically enter continuous mode. The display screen will show the environmental
humidity and the compressor will be on. After the fan runs for about 3 seconds; press this button again. The compressor will stop and the
display screen will show “- -”. The unit will be in standby mode with the fan running for another minute before stopping.
Hold down this button until the light powers ON. Press “MINUS” and “ADD” (1-24) to set the start time. When the count down is over, the fan and
compressor will start.To power off the unit, hold down this button until the button light powers ON. Press “MINUS and ADD to set the stop. When
the time is complete, the fan and compressor will turn off. Press this button for 3 seconds to show the current temperature After 10 seconds, the
display will return to show the current humidity. Continue to hold this button to show the current temperature.
The humidity can be increased by increments of 5 %RH during normal mode. Hold this button for 1 second to increase the humidity.
