PRODUCT OPERATION
(Continued)
8
MAINTENANCE OF THE MACHINE
WARNING
: Before dusting or cleaning, turn the power switch off and disconnect the power cord from the
machine. It is very important to clean all the sensors in the machine with a soft brush to avoid any paper
particles or dust from sticking to the light transmitter or the light-receiver sensors. It is important to clean the
inside of the machine occasionally. Unplug the machine and lift the top cover to gain access to the interior.
If necessary, the glass surfaces of the detectors may be wiped with a soft cloth damped with alcohol.
To get the best results out of your bill counter, Royal Sovereign recommends using
Royal Sovereign Cleaning
Cards (RBC-CLN)
to remove dirt, dust, oils, and other contaminates from bill counters. With the machine on,
simply run the cleaning card through the machine like a bill. This cleaning card will run through and clean the
sensors of dirt and other contaminates. Cleaning cards are recommended to be used after every 100 cycles.
4.
DATE & TIME SET -
Press the “ENTER/START” button to enter the setting, it displays
“YYYY-MM-DD HH:MM:SS”, press the “
▼
” or “
▲
” buttons to minus or add one for the value
to
set the date and time, press the number 4 or 6 to go to the left or right option. Press the
“ENTER/START” button to quit.
5.
BEEP SET -
Press the “ENTER/START” button to enter the setting, it will display 1. KEY
BEEP ON 2. KEY BEEP OFF 3. WARNING BEEP ON 4. WARNING BEEP OFF. Press the “
▼
” or
“
▲
” buttons to select the item you need then press the “ENTER/START” button to quit.
6.
PRINTER SET -
Press the “ENTER/START” button to enter the setting, 1. 4800bps 2.
9600bps 3. 14400bps 4. 19200bps 5. 28800bps 6.38400bps 7.57600bps, press the “
▼
” or
“
▲
” buttons to select the item you need then press the “ENTER/START” button to quit.
3.
Place bills into the hopper to begin counting.