PRODUCT OPERATION
1.
Attach power cable to
the
back of machine, plug into a three prong outlet, and turn
the
power switch
on.
-
The unit will conduct an automatic self-diagnostic test to ensure accurate counts.
-
After five seconds
of the counting wheels spinning
, the screen will display a "0".
-
If there is a problem, the preset display will show an error code. (See ERROR CODE
DISPLAYS -
LOCATED ON PAGE 11.)
2.
Select bill counting settings
.
-
Before counting, select
the
counting settings that are related to your counting needs, such as:
Add
mode or Batch mode.
3.
Insert the bills into the hopper to begin counting.
MAINTENANCE OF THE MACHINE
WARNING:
Before doing any
dusting
, turn the power switch off and disconnect the power cord from the machine
.
It is very
important to clean all the sensors in the machine with a soft brush to avoid any paper particles or dust from sticking to the light
transmitter or the light-receiver sensors.
It is important to clean the inside of the machine occasionally.
Unplug the
machine and lift the top cover to gain access to the interior.
If necessary,
the
glass
surfaces
of the
detectors
may
also
be
wiped
with
a
soft
cloth
damped
with
alcohol.
To get the best results out of your
bill
counter, Royal Sovereign recommends using
Royal Sovereign Cleaning Cards
(RBC-CLN)
to remove dirt, dusts, oils, and other
contaminates from bill counters.
With the machine on, simply run the
cleaning card through the machine like a bill. This cleaning card will run through and clean the sensors of dirt and other
contaminates.
Cleaning cards are recommended to be used after every 100 cycles.
CAUTION: DO
NOT
CHANGE
THE
POSITION
OF
THE
DETECTORS
AND/OR
OPTICAL
SENSORS
7
