Dimensional Detection
To manually turn the DD function on/off, press the "DD" button.
The DD indicator light will light up showing that the
function has been turned on.
If the machine detects a counterfeit note, it will stop counting and emit a beeping
sound.
The preset display will show DD.
Remove the suspicious note and press "
RESET
" to continue counting.
Batch Counting Mode
Use this mode to count bills into batches. To set the machine to batch counting mode, press the "PRESET" button
until the preset display shows 000. Press the +1 and x10 buttons to reach the desired batch amount between 1 and
999. Once bills are placed into the hopper the machine will automatically begin counting. When it reaches the
preset batch amount the machine will stop. Remove the batch of bills from the stacker and the machine will begin
counting the next batch. If the quantity of the remaining bills in the hopper is less than that batch amount you will
need to place more bills into the hopper to finish counting the batch. To stop using batch mode press the "PRESET"
button to clear the preset display.
Add Mode
Use this mode to add the quantity of bills counted to get an accumulative total. To set the machine to add mode,
press the "ADD" button. The add indicator will light, showing that this mode is turned on. Place bills into the hopper
and the machine will automatically begin to count them. When you remove the counted bills from the stacker and
place new bills into the hopper it will continue counting where it left off on the previous set of bills. To stop using
the add mode press the "ADD" button again and the indicator light will shut off.
6
CONTROL PANEL
FEATURES
