8
6. CONTROL PANEL
TEMP.
To change the mode from cold to hot or oppositely. Temperature
for hot mode on upper roller is max
.
REV
To reverse the rollers, press and hold the button.
Speed
Rotate the knob to control the roller’s speed from 0 to 6m/min.
Run/Stop
To start or stop the rollers.
Pressure gage: To indicate the pressure of top roller from 0 to 1Mpa
Height control crank
：
To set the
height limit block(*Make sure the
upper roller is in the highest
location).
Height scaleplate: To indicate the
gap of the two laminating rollers.
(145Psi) pressure value.
Pressure regulating valve: To change the pressure of top roller from 0 to
0.6Mpa (87Psi) pressure value.
Reversing valve: To make the top roller go up and down.
