.
Built into this unit is self-evaporating drainage feature. Under normal operating conditions, the self-evaporative
feature of the unit will operate without issue or maintenance being required.
However, in high humidity conditions, you may need to drain manually water from the unit.
(Ft error)
You may
also choose to do continuous drain option, which would drain water automatically from the unit (in dehumidifier
mode)
For continuous drainage into a floor drain
To operate similar to a stand alone dehumidifier, you may choose to use continuous drain option
1. Turn off the power to the unit and unplug the unit
2. Remove the plug of the water outlet opening. (Either middle or bottom)
3. Attach the drain hose . Ensure that the hose is straight without any knots and clear of obstruction.
4. Place the other end of the drainage hose into a floor drain.
5, Replace the rubber sealing plug after operation to prevent leaks
CLEANING THE AIR FILTER
The filter should be cleaned about every 2 weeks to maintain proper air flow
Important
: Do not operate the unit without an air filter, or the evaporator may be contaminated.
1. Press POWER button to turn OFF the unit. Unplug the unit from the electrical power outlet.
2. Remove the filter from the unit.
3. Use a vacuum cleaner or a wet cloth to clean the air filter. Ensure that the air filter is dry before placing it
back into the unit
STORAGE
If you will not be using the unit for an extended period of time (more than a few weeks) it is best to clean the
unit and dry it out completely. The unit must be kept in upright position when in storage.
1.
Unplug the unit and remove exhaust hose and window kit store with the unit.
2.
Drain the remaining water from the unit.
3.
Clean the filter and let the filter dry completely
4.
Re-install the filter.
5.
Preserving the machine in ventilating, dry, non- corrosive gas and safe place indoor
