Sleep Mode
While in cooling mode, press the sleep button to set the temperature. It will increase 1
°
C after an hour and at most
increase 2
°
C after 2 hours.
Auto Swing
Press this button to have the louver automatically swing continuously up and down.
Press the button again to turn off Auto Swing function
Water Drainage
Water Full Alarm
The internal water tank in the air conditioner has a water level safety switch. When water level reaches or exceeds an
anticipated height, the water full indicator light will turn on. This may happen in high humidity environmental
conditions. In order for the unit to resume operation it must be drained.
To Drain Manually
1. Turn off the power to the unit and unplug
The unit has two locations for water draining, one in the middle and the other at the bottom
2. Place a water tray under the drainage port at the middle of the unit to collect water
3. Remove the rubber drainage plug and allow water to drain
4. Replace the plug, when drainage water stops flowing
5. Repeat step 2 -4 for the bottom location
